Fischer FIS VL 410 C Vinylester Resin Cartridge 410ml 539463

The solid injection mortar for standard applications in cracked concrete and masonry. Cartridge size 410ml, can be used with most standard dispensers.

Approved for anchorings in:

Concrete C20/25 to C50/60, cracked

Hollow blocks made from lightweight concrete

Vertically perforated brick

Perforated sand-lime brick

Solid sand-lime brick

Solid brick

Also suitable for:

Rebar connections

Concrete C12/15

Hollow blocks made from concrete

Aerated concrete

Advantages

The FIS VL is approved for use in cracked concrete and masonry, and achieves a high load-bearing capacity in these conditions.

The injection mortar, based on vinylester resin, allows for anchorings in water-filled drill holes (410 ml cartridges only), thus allowing for rapid progress.

The temperature resistance of the FIS VL injection mortar of -40 °C to +120 °C allows for a solid load level even when subjected to high temperature demands, thus providing great flexibility.

FIS VL HIGHSPEED has a significantly shorter curing time than FIS VL, thus also ensuring swift work progress even at low temperatures.

Resin and hardener are stored in two separate chambers and are not mixed and activated until extrusion through the static mixer.

Partially used cartridges can be reused, simply by changing the static mixer.