Tyrolit Metal Chopsaw Disc 350mm x 2.8mm x 25.4mm Pack of 10 A46S-BF

The Tyrolit 350mm metal cutting disc is most used with a chopsaw.

The Tyrolit cut-off wheel for steel is suitable for cutting profiles, solid material, and large cross-sections due to its design with two external reinforcements.

With the Tyrolit metal cutting disc, you can achieve reduced cutting times coupled with minimal effort.

These Tyrolit metal cutting discs carry the Organisation for the Safety of Abrasives (oSa) mark, the worldwide protected label for the highest level of tested safety of cutting and grinding tools.

Product Specification.

Disc Diameter: 350mm (14”)

Disc Thickness: 2.8mm (7/64”)

Bore: 25.4mm (1”)

Manufactured to EN 12413 standard.

Max. RPM: 4400

Fragile disc, not to be used for side grinding or wet grinding.

Tyrolit part no. 223033

SAFETY TIPS

Read the manufacturer's instructions carefully.

Wear goggles to guard against flying chips or dust

Inspect the condition of the wheel frequently.

Adjust the guard to deflect sparks and dust.

Maintain the revs and let the wheel do the work.