Tyrolit Metal Cutting Disc 300mm x 3.5mm x 20mm Pack of 10 A30S-BF

The Tyrolit cut-off wheel for steel is suitable for cutting profiles, solid material and large cross-sections due to its design with two external reinforcements.

With the Tyrolit metal cutting disc, you can achieve reduced cutting times coupled with minimal effort.

These Tyrolit metal cutting discs carry the Organisation for the Safety of Abrasives (oSa) mark, the worldwide protected label for the highest level of tested safety of cutting and grinding tools.

The Tyrolit 300mm (12”) metal cutting disc with a 20mm bore is most commonly used with a petrol disc cutter (Stihlsaw).

Very popular disc for onsite metal cutting and demolition work.

Product Specification.

Disc Diameter: 300mm (12”)

Disc Thickness: 3.5mm (9/64”)

Bore: 20mm (13/16”)

Manufactured to EN 12413 standard.

Max. RPM: 5100

Fragile disc, not to be used for side grinding or wet grinding.

Tyrolit part no.  223035

SAFETY TIPS

Read the manufacturer's instructions carefully.

Wear goggles to guard against flying chips or dust

Inspect the condition of the wheel frequently.

Adjust the guard to deflect sparks and dust.

Maintain the revs and let the wheel do the work.