Fischer EA M20 N Drop In Anchor Zinc Plated Art-No. 90164 (Pack of 25)
-
The cost-effective hammerset anchor without approval for multiple fixings in non-structural systems.
The Fischer hammerset anchor EA N is an internal thread anchor made from zinc-plated steel. The hammerset anchor is ideal for the multiple fixation of non-structural systems that do not require approved anchorage. The assembly of the internal thread anchor is extremely cost-effective thanks to the low embedment depth, fast hammerset installation, and direction-controlled screwing process. The EA N is mounted with the hammer flush to the base material. With the setting tool EA-ST, the sleeve is expanded and braced against the drill hole wall through the driving in of the internal pin. No torque should be applied to the screw to enable correct expansion.
- Â
Technical data:-
- Drill hole diameter 25mm
- Min. drill hole depth 80mm
- Effective anchorage depth 80mm
- Anchor length 80mm
- Internal thread M20
- Minimum bolt penetration 20mm
- Maximun bolt penetration 34mm