Fischer FIS VL 410 C Vinylester Resin Cartridge 410ml 539463


- Buy 12 for £8.34 Incl. VAT £6.95 Excl. VAT each save 7%
- Buy 60 for £7.80 Incl. VAT £6.50 Excl. VAT each save 13%
The solid injection mortar for standard applications in cracked concrete and masonry.
Cartridge size 410ml.
Can be used with most standard dispensers.
Approved for anchorings in:
Concrete C20/25 to C50/60, cracked
Hollow blocks made from lightweight concrete
Vertically perforated brick
Perforated sand-lime brick
Solid sand-lime brick
Solid brick
Also suitable for:
Rebar connections
Concrete C12/15
Hollow blocks made from concrete
Aerated concrete
Advantages
The FIS VL is approved for use in cracked concrete and masonry, and achieves a high load-bearing capacity in these conditions.
The injection mortar, based on vinylester resin, allows for anchorings in water-filled drill holes (410 ml cartridges only), thus allowing for rapid progress.
The temperature resistance of the FIS VL injection mortar of -40 °C to +120 °C allows for a solid load level even when subjected to high temperature demands, thus providing great flexibility.
FIS VL HIGHSPEED has a significantly shorter curing time than FIS VL, thus also ensuring swift work progress even at low temperatures.
Resin and hardener are stored in two separate chambers and are not mixed and activated until extrusion through the static mixer.
Partially used cartridges can be reused, simply by changing the static mixer.